June 1 2007
by Damien Zielinski

If you can perform the Crimp, you can fix a bead tip to a leather necklace, bracelet, or anklet. Our example uses a Thin Round Leather Strand and two different kinds of Sterling Silver Leather Bead Tips, but it doesn't really matter as long as the leather fits snugly into the opening of the bead tip. You will also need some chain nose pliers.

Attaching the Leather Bead Tip

In the first example below, the leather is inserted into the bead tip as far as it will go. Since the bead tip is round to begin with, all you need to do is perform a crimp to flatten it out. Use the midsection of the pliers' teeth to get more leverage in crushing the metal around the leather.

In the second example, the bead tip is slightly more challenging to attach because it is neither round nor closed to begin with. Slide the leather into the slot of the bead tip, and hold it there with your free hand. Crimp the bead tip slightly with the nose of your pliers to hold it onto the leather, allowing you to remove your supporting hand. Then, when you've accomplished all that you can with the tip of the pliers, it's time to crimp the bead tip to the point where both sides of the opening close in to the centre. Do this slowly and in stages. When crimping from one angle is too difficult, switch to another side, and eventually what started as a square slot turns into something totally round. Finished!